ESP Bypass Plugs

Bypass Plugs

Blanking Plug
The Blanking Plug locks in the Bypass Nipple during operation of the ESP to prevent the recirculating of fluids during pumping operations. RMSpumptools provides a variety of top no-go and bottom no-go Blanking Plugs and sizes, based on industry standards, appropriate to application or customer need.

CT Logging Plug
This plug is used when coiled tubing is the means of deploying the logging tool and will accommodate coiled tubing sizes up to 1.75". The CT Logging Plug incorporates seals and locking dogs to enable its use with the RMSpumptools Y-Tool and Bypass Nipple.

Wireline Logging Plug
The WL Plug allows pumped production during logging operations. The profile is matched to the Bypass Nipple and the plug incorporates an internal flow tube to suit the slickline or electric line used. The plug can be fitted with an equalising feature to drain off the hydrostatic head above the plug.

Blanking Plug >>
CT Logging Plug >>
Wireline Logging Plug >>

Isolation Sleeves

The Isolation Sleeve is deployed and removed by slickline or CT and is designed to isolate the ESP leg of the Y-Tool. It incorporates seals which locate in the seal bores of the Y-Tool to prevent pressure between the ESP Leg and the bypass tubing form passing in either direction.Used when the bypass tubing is utilised as a production tubular when free flowing the well or running dual ESP systems. When free flowing or producing through the bypass in this way, it is important not to allow free flow through the ESP, which would otherwise create premature wear in the ESP.

Also used when bullheading fluids, such as acid, down the bypass tubing, directing the acid to below the ESP and avoiding dissipation through the ESP.

The through bore allows up to 2.31" tools to be run whilst isolation tools are in-situ.

Product Enquiry

For further information on this product please call our Customer Services Team on:

+44 (0)1651 874999