ESP Dual & Bypass Systems
RMSpumptools pioneered the concept of the automatic dual ESP system which has been a major success world-wide. Downtime is minimal, workovers cost less and there are significant savings in other operational areas.
Y-Chek (Automatic Y-Tool)
The Y-Chek is firmly established as the New Standard in automatic Y-Tool technology. This automatic downhole valve is located within the RMSpumptools Y-Tool and is designed to prevent recirculation of pumped fluid from an operated ESP.
Y-Tool System
The Y-Tool system offsets the ESP in the well to provide a straight line conduit for wireline or coiled tubing tools to bypass the ESP. Dual Systems allows the operator to run two complete ESP systems in one well, providing a downhole back-up system.
Dual Concentric/Multiple Zone
A dual system using two independent ESPs that separately and individually produce from two production zones in the same well without mingling the fluids.
Double Horsepower
A dual ESP system that enables maximum production in high volume/high PI wells by providing high downhole horsepower shared between two standard-range ESPs.
Bypass Neck Clamps
ESP Bypass Neck Clamps in all sizes and fully adjustable to fit any brand of ESP, ensuring maximum protection of Control Lines and Cable.
Bypass Plugs
Bypass Plugs including Blanking Plugs, Coiled Tubing Logging Plugs, Wireline Logging Plugs and Isolation Sleeves - a full range of complimentary ESP Bypass products to facilitate intervention and maximise production.
Bypass Tools
RMSpumptools world renowned Y-Tool (ESP Bypass System) represents design at its functional best, providing a means of allowing well intervention below an ESP using wireline or coiled tubing.
World Renowned Performance
As a flow bypass, the Y-Tool is also used to form the basis of the popular dual ESP system. It comes with a comprehensive range of associated and compatible products and a complete package of accessories.
The Y-Tool system offsets the ESP in the well to provide a straight line conduit for wireline or coiled tubing tools to bypass the ESP. The system is built up together with the ESP at rig site and is run in hole together with the ESP.
The Y-Tool Y-Block has an upper connection for the production tubing and two lower connections, one for the ESP and the other for the bypass. A blanking plug is located in the bypass side in a special nipple to prevent recirculation of the pumped fluid. The blanking plug is removed prior to and after intervention.
