Tubing String Products
RMSpumptools offer Tubing String Products and accessories that not only enhance the functionality of our Multiple ESP systems, but also stand alone and extend the life of an ESP - allowing for more efficient operations.
ADV (Automatic Diverter Valve)
The patented RMSpumptools ADV™ (Automatic Diverter Valve) is a field proven, fully automatic valve that controls tubing to annulus communication.
NRV (Non Return Valve)
The NRV is a high specification precision engineered piston-type check valve for use in specialist downhole applications.
The Adjustable Union is a tubing string mechanical telescopic device designed to adjust the spacing within the tubing string where close tolerancing and accuracy is required.
PRL Swivel Sub
The PRL (positive rotational lock) Swivel Sub is an in-line tubing device designed to provide orientation between two sets of tubing assemblies.
BOP CAN & Fluted Hanger Assembly
The BOP CAN provides a pressure barrier around the production tubing, power cable and control lines to allow BOP RAMS to close off during well testing with an ESP.
The Pump Chek is an all metal pressure sealing valve designed to provide a pressure barrier to isolate ESPs preventing fall-back on the pump on ESP shutdown - a known cause of ESP failure.
SandCat ESP Desander
RMSpumptools SandCat is a down-hole centrifugal Sand Separator designed to separate out sand from the produced fluid before it enters the pump.
The STEALTH Clamp™ has been developed to give maximum protection to control lines and power cables in a low profile, slimline design. The patented threaded clamping design prevents slippage when running in hole and can withstand 40,000lbs of axial load before moving.
Extending ESP Life
The Automatic Diverter Valve (ADV) or Non-Return Valve (NRV) used to isolate an ESP as part of a dual Y-tool or CAN system can also be used in a single ESP situation to isolate from back flow and prevent Sand fallback, extending the life over a stand alone ESP.
Our Adjustable Union and PRL Swivel that allow for alignment of two Y-tools are just as effective aligning eccentric downhole assemblies below a wellhead or packer, saving critical rig time without compromising the strength of the tubing string.
The BOP CAN enables use of an ESP during a Drill Stem Test while maintaining full well control, allowing for more accurate evaluation of a reservoir with real-world production methods.